top of page

Load data for 9 mm Steyr (Roth) + .355 | 80gr | Peregrine SD 9mm Short

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s): none

9 mm Steyr (Roth) + .355 | 80gr | Peregrine SD 9mm Short

Load Specifications

Bullet:
.355 | 80gr | Peregrine SD 9mm Short
Bullet Weight:
80gr | 5.2g
Bullet Diameter:
0.355" | 9.02mm
Bullet Length:
0.520" | 13.2mm
Caliber:
9 mm Steyr (Roth)
Case Length (l3):
0.913" | 23.2mm
Cartridge Length (C.O.L.):
1.260" | 32.0mm
Seated Depth:
0.173" | 4.4mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
17.4 Grains of Water | 1.13 cm³
Primer Size:
Small Pistol (SP)
Max. allowed Pressure:
19580 psi | 1350 bar
LID:
LID_B8176_C1226
Recommended Twist Rate:
1:29 - 1:24

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 62 loads in caliber 9 mm Steyr (Roth) with .355 | 80gr | Peregrine SD 9mm Short bullet and 31 powders such as none. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 70N
<<locked>>
65%
17085
87%
**62
97%
ADI AS 30
<<locked>>
67%
16375
84%
**60
100%
ADI AS 50N
<<locked>>
66%
16578
85%
**99
100%
[Accurate No. 2]*
<<locked>>
70%
17100
87%
**02
86%
Accurate Solo 1000
<<locked>>
67%
17521
90%
**93
100%
Accurate Solo 1250
<<locked>>
77%
17593
90%
**45
97%
Alliant BULLSEYE
<<locked>>
66%
17448
89%
**65
91%
Alliant UNIQUE
<<locked>>
80%
17506
89%
**91
91%
Baschieri & Pellagri 100
<<locked>>
71%
17042
87%
**96
99%
Hodgdon Universal
<<locked>>
72%
17085
87%
**62
97%
Hodgdon TrailBoss
<<locked>>
95%
6541
33%
**5
93%
Lovex S020
<<locked>>
72%
17100
87%
**55
93%
Maxam CSB 1
<<locked>>
80%
17593
90%
**45
97%
Maxam CSB 2
<<locked>>
82%
17521
89%
**07
100%
Maxam CSB 3
<<locked>>
73%
17448
89%
**29
99%
Maxam CSB 4
<<locked>>
68%
16621
85%
**96
100%
Maxam CSB 5
<<locked>>
64%
16998
87%
**70
100%
[Ramshot Silhouette]*
<<locked>>
63%
16795
86%
**52
87%
ReloadSwiss RS 12
<<locked>>
71%
17318
88%
**01
100%
[ReloadSwiss RS 14]*
<<locked>>
93%
5076
26%
**3
82%
ReloadSwiss RS 20
<<locked>>
82%
17405
89%
**04
93%
Rottweil P 801
<<locked>>
64%
17231
88%
**55
100%
SNPE Vectan A0
<<locked>>
78%
17390
89%
**25
90%
SNPE Vectan BA 9
<<locked>>
68%
16723
85%
**96
94%
SNPE Vectan BA9 1/2
<<locked>>
71%
16810
86%
**25
96%
[Somchem MP200]*
<<locked>>
71%
17231
88%
**58
89%
Somchem MS200
<<locked>>
75%
17376
89%
**45
92%
Vihtavuori N320
<<locked>>
70%
16752
86%
**29
100%
Vihtavuori N32C Tin Star
<<locked>>
95%
16389
84%
**70
100%
Vihtavuori N330
<<locked>>
75%
16955
87%
**85
98%
Vihtavuori N340
<<locked>>
77%
17390
89%
**55
91%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 70N
<<locked>>
61%
15156
77%
**09
96%
ADI AS 30
<<locked>>
62%
14112
72%
**94
100%
ADI AS 50N
<<locked>>
62%
14446
74%
**37
99%
[Accurate No. 2]*
<<locked>>
62%
13039
67%
**78
81%
Accurate Solo 1000
<<locked>>
60%
14185
72%
**94
99%
[Accurate Solo 1250]*
<<locked>>
60%
10167
52%
**93
88%
[Alliant BULLSEYE]*
<<locked>>
62%
15447
79%
**02
89%
[Alliant UNIQUE]*
<<locked>>
64%
10733
55%
**45
81%
Baschieri & Pellagri 100
<<locked>>
60%
11995
61%
**38
96%
Hodgdon Universal
<<locked>>
62%
12386
63%
**11
93%
[Hodgdon TrailBoss]*
<<locked>>
72%
3771
19%
**8
82%
[Lovex S020]*
<<locked>>
61%
11502
59%
**65
86%
[Maxam CSB 1]*
<<locked>>
61%
9703
50%
**66
87%
Maxam CSB 2
<<locked>>
61%
8456
43%
**86
92%
Maxam CSB 3
<<locked>>
60%
11545
59%
**45
95%
Maxam CSB 4
<<locked>>
61%
13373
68%
**98
99%
Maxam CSB 5
<<locked>>
61%
15751
80%
**40
100%
[Ramshot Silhouette]*
<<locked>>
60%
15069
77%
**93
85%
ReloadSwiss RS 12
<<locked>>
61%
12198
62%
**43
99%
[ReloadSwiss RS 14]*
<<locked>>
90%
4641
24%
**4
80%
[ReloadSwiss RS 20]*
<<locked>>
63%
9616
49%
**99
80%
Rottweil P 801
<<locked>>
60%
15069
77%
**96
100%
[SNPE Vectan A0]*
<<locked>>
62%
10805
55%
**93
81%
SNPE Vectan BA 9
<<locked>>
61%
13155
67%
**81
90%
SNPE Vectan BA9 1/2
<<locked>>
61%
12270
63%
**75
91%
[Somchem MP200]*
<<locked>>
61%
12198
62%
**81
82%
[Somchem MS200]*
<<locked>>
61%
11313
58%
**38
84%
Vihtavuori N320
<<locked>>
61%
12488
64%
**98
99%
Vihtavuori N32C Tin Star
<<locked>>
62%
6092
31%
**2
97%
Vihtavuori N330
<<locked>>
61%
10515
54%
**48
91%
[Vihtavuori N340]*
<<locked>>
62%
10472
53%
**15
81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page